Lift Car Lighting
-
LEDelite Pro50
New and improved version of the Ledelite Pro35.
-
LEDelite Pro50 Secure
Vandal resistant recessed car lighting
-
Pro50 Low Profile Mortice Light
NEW Mortice 10mm Depth Down light
-
Pro50 spare parts and controllers
Accessories and spares for Pro50 LED lighting kits.
-
Henning Light Watcher (Power Save) Kit - Order Code: LWK01
Henning Light Watcher (Power Save) Kit - Order Code: LWK01
-
Slim LED Batten
An elegant low-profile LED batten range with superior light output and energy saving performance over traditional fluorescent solutions.Featuring Epistar high power LEDs with 4000K natural white illumination for excellent colour rendition.
-
Lumo3C alternative 24 volt LED Linkable Strip Lighting
LED Linkable Strip Lighting
-
Trojan Recessed Vandal Resistant LED Car Light
The Trojan LED vandal resistant car light is designed for fitting within the roof of a lift car.
-
Titan Surface Mounted Slim LED Car Light
The Titan surface mounted slim LED car light is designed for mounting to the roof of a lift car.
-
GEMINI 4 Surface Mounted Multi-LED Vandal Resistant Lift Car Light
• 3 x 1250 lumen high efficiency multi-LED boards, providing 3750 lumens at just 33 watts!
• Super compact size (464 x 376 x 71mm - LWH), ideal for both small and large lift cars!
• Available in white or stainless steel.
• Mains or 3hr maintained emergency options.
• 3mm flame retardant Macrolon diffuser.
• Factory fitted rear gasket prevents light leakage and provides snug fit to ceiling.
• Life expectancy in excess of 50,000 hours!
• Vandal resistant, with no visible fixings
• Internal emergency test button with illuminated charging. -
MVES40/3 Mains Voltage 40 Watt Emergency Supply
The MVES40/3 is a remote conversion unit that converts any 230v light(s) with less than 40 watt output into a 3 hour emergency backed up fitting.
-
12V LED Driver Units
LED lamps, by their very nature, operate at extremely low wattages. LED drivers have a very low minimum loading parameter, (generally zero watts or total lamp failure) which makes them ideally suited to the low running wattages associated with LED lamps.
-
Standard GU10 Lamp
These lamps yield a bright white light, similar to that of a low voltage halogen downlight. They have an average life of 4000 hours.
-
Low Voltage Cabinet/Display Lighting
These lights provide flexibility of installation as they can be recessed to give a flush fitting, or with the use of a simple collar, they can be surface mounted.
-
12V Electronic Dimmable Transformers
These are suitable for both commercial and domestic markets.
-
PL Compact Fluorescent GU10 Lamp
A direct replacement for standard GU10 halogen lamps, these lamps use around 80% less energy and last up to twice as long as standard GU10 halogen lamps.
-
Standard GU10 Downlights
Standard GU10 Downlights
-
LED GU10 Lamp
A direct replacement for standard GU10 halogen lamps, offering a very bright light from a very low wattage, resulting in incredibly low running costs.
-
Fire Rated Downlights - Mains Voltage
Fire Rated Downlights - Mains Voltage
-
PL GU10 Downlights
PL GU10 Downlights
-
Low Energy Task Lighting (Mains)
Our range of low energy stainless steel task lights offer a choice of both flat and angled illumination of work surfaces or for use where looks are of paramount importance.
-
IP65 Jet Proof PL GU10 Downlights
IP65 Jet Proof PL GU10 Downlights
-
Fire Rated Downlights - Low Voltage
Fire Rated Downlights - Low Voltage
-
Dome Luminaires
These attractive luminaries are designed for use where aesthetics and performance are equally important. They are suitable for both general purpose, utility and lift car lighting applications.
-
Decortrim Luminaires
Decorative, stylish and functional, the Decortrim range is suitable for general purpose, utility and lift car lighting applications.
-
Single Batten Fittings And Diffusers
<p>anufactured to BS4533, these attractively designed single or twin fluorescent batten fittings are supplied complete with lamps and are available with a full range of light pack attachments.</p>
-
Twin Battens And Diffusers
<p>Manufactured to BS4533, these attractively designed single or twin fluorescent batten fittings are supplied complete with lamps and are available with a full range of light pack attachments.</p>
-
Maintained Emergency Batten Fittings
Battery packs are designed to provide a 3 hour emergency backup.
-
Trough Reflectors And Wire Guards
Trough reflectors are suitable for use with both single and twin fluorescent batten fittings. Optional wire guards clip on to the metal reflector ensuring lamp protection.
-
Slimline LED Link Lights
Manufactured to EN 60598-2-5, These link lights offer an ultra slim and unobtrusive lighting option, suitable for lift car lighting and a whole host of commercial and domestic applications.
-
T5 Stick Lites
The T5 Stick Lite brings together the T5 lamp and the latest in miniature electronics, offering one of the most compact solutions for lift car and amenity lighting.
-
Downlight Ceiling Converter
Now you can convert your traditional spotlight fittings into modern halogen or LED downlights, without the need for expensive and messy ceiling repairs.
Ceiling converters are ideal for lift car lighting applications, especially during refurbishment or modernisation, when larger, more cumbersome downlights are being replaced with smaller, modern ones. Available in white, stainless steel and brass, ceiling converters cover existing holes of up to 135mm in diameter. They are supplied with ceramic GU10 and LV GX5.3 lamp holders. -
Challenger Surface Mounted Car Light
The Challenger car light is designed for surface mounting to the roof of a lift car.
-
Trident Surface Mounted Angled Car Light
The Trident surface mounted angled car light is designed for mounting to either the side or the rear of a lift car, where central lighting may be impractical or not possible.
-
Trident Surface Mounted Angled LED Car Light
The Trident surface mounted angled LED car light is designed for mounting to either the side or the rear of a lift car, where central lighting may be impractical or not possible.
-
Emergency Light Pack
The E4/36 will sustain any T5 or T8 fluorescent lamp from 4W (150mm) to 36W (1200mm) in the non-maintained mode for 4 hours.
-
Lamp and Lead Kits for Emergency Light Pack
More Details Lamp and Lead Kits for Emergency Light Pack -
Non Maintained Emergency Light Pack
With 12 Volt DC Alarm Supply
-
Maintained Emergency Light Pack
- With 12 Volt DC Alarm Supply
-
Lamp and Lead Kits for Non and Maintained Emergency Light Pack
Selection of installation kits which include both the fluorescent tube and fly-lead kit.
-
Mains Powered Emergency Supply
The PDG600 will sustain a 9W low energy mains GU10 downlight for 4 hours.
-
Conversion Modules For Fluorescent Light Fittings
A comprehensive range of conversion kits enabling standard fluorescent fittings to be utilised for emergency lighting purposes, in either the maintained or non-maintained mode. These modules give 3 hours back-up, upon mains failure.
-
Obsolete LUMO 3C 24V LIGHT PACK LUMO3C
The Lumo range of fittings are now obsolete
LUMO 3C 24V LIGHT PACK
-
230V 7W LED Striplight with Motion Sensor
Slim low-profile design with integrated LED driver, constructed from aluminium and polycarbonate, produces an even light distribution.
-
TENAX LED Bulkhead
Constructed from anti-corrosive polycarbonate material, with an IP65 weatherproof rating and an IK10 impact rating, the Tenax Quad/Tenax One casings* offer superior commercial, industrial, indoor and outdoor reliability. A UV-stabilised body, which prevents discolouration of the body, ensures a long life outdoors. Available in square and round bodies, in a black or white finish
-
LED Gear Tray
LED Gear tray for retrofitting into lift car ceiling