Wurtec Lift Products
-
Wurtec Wire Rope Turning Pliers
Attaching wire ropes to shackles with babbitt? You will need this tool to form nice, neat, uniform bends.
-
Wurtec Replacement Bolt for Rail Block
Wurtec Replacement Bolt for Rail Block
-
Wurtec Laser Alignment Tool Kit
Snap this gauge onto the face of a rail using the magnet provided. The gauge will stay attached to the rail allowing you to make any adjustments you need. The gauge is made of lightweight plastic and has the laser alignment gauges installed to match the position of the dual line laser gauges.
-
Wurtec Plumb Line Drop Tool
Set your DBG then attach this lightweight aluminum tool onto the landing and extend your plumb lines into the hoistway once anchored to floor at sill.
-
Wurtec Plumb Line Tensioner
Easily maintains tension in plumb line up to its ultimate breaking strength. Lightweight, compact and easy to install over our plumb line clamp.
-
Wurtec Universal Rail Alignment Tool
This rail alignment kit is all you need to start aligning your rails. It fits 8, 12, 15, and 18.5 pound rails.
-
Wurtec Joint Alignment Tool
Properly aligning elevator rails at the joint can be difficult, and if done incorrectly can lead to a bad ride or hours of filing and dressing the rail joint.
-
Wurtec Rail Block and Clevis
Use this Block and Clevis to hang your car or counterweight frame at any location in the hoistway. Rail blocks must be used in pairs.
-
Wurtec Hydraulic Wire Rope Cutter
Here's the modern, safe way to cut wire ropes. This hand-held, hand-pumped, hydraulic cutter is ideal because of its compact, lightweight, rugged design.
-
Wurtec Lift Door Stop (Pocket Size)
The Wurtec lift door stop is designed to create a mechanical wedge which prevents manual door movement. It simply inserts into the sill groove, contacting the door edge, thus pivoting the lever forwards.