Wurtec Lift Products
-
Wurtec Wire Rope Turning Pliers
More Details Wurtec Wire Rope Turning PliersAttaching wire ropes to shackles with babbitt? You will need this tool to form nice, neat, uniform bends.
-
Wurtec Replacement Bolt for Rail Block
More Details Wurtec Replacement Bolt for Rail BlockWurtec Replacement Bolt for Rail Block
-
Wurtec Laser Alignment Tool Kit
More Details Wurtec Laser Alignment Tool KitSnap this gauge onto the face of a rail using the magnet provided. The gauge will stay attached to the rail allowing you to make any adjustments you need. The gauge is made of lightweight plastic and has the laser alignment gauges installed to match the position of the dual line laser gauges.
-
Wurtec Plumb Line Drop Tool
More Details Wurtec Plumb Line Drop ToolSet your DBG then attach this lightweight aluminum tool onto the landing and extend your plumb lines into the hoistway once anchored to floor at sill.
-
Wurtec Plumb Line Tensioner
More Details Wurtec Plumb Line TensionerEasily maintains tension in plumb line up to its ultimate breaking strength. Lightweight, compact and easy to install over our plumb line clamp.
-
Wurtec Universal Rail Alignment Tool
More Details Wurtec Universal Rail Alignment ToolThis rail alignment kit is all you need to start aligning your rails. It fits 8, 12, 15, and 18.5 pound rails.
-
Wurtec Joint Alignment Tool
More Details Wurtec Joint Alignment ToolProperly aligning elevator rails at the joint can be difficult, and if done incorrectly can lead to a bad ride or hours of filing and dressing the rail joint.
-
Wurtec Rail Block and Clevis
More Details Wurtec Rail Block and ClevisUse this Block and Clevis to hang your car or counterweight frame at any location in the hoistway. Rail blocks must be used in pairs.
-
Wurtec Hydraulic Wire Rope Cutter
More Details Wurtec Hydraulic Wire Rope CutterHere's the modern, safe way to cut wire ropes. This hand-held, hand-pumped, hydraulic cutter is ideal because of its compact, lightweight, rugged design.
-
Wurtec Lift Door Stop (Pocket Size)
More Details Wurtec Lift Door Stop (Pocket Size)The Wurtec lift door stop is designed to create a mechanical wedge which prevents manual door movement. It simply inserts into the sill groove, contacting the door edge, thus pivoting the lever forwards.
-
Door Pressure Gauge Pocket Sized Wurtec Door Pressure Gauge
More Details Door Pressure Gauge Pocket Sized Wurtec Door Pressure GaugeRated at 150N, this pocket sized door pressure gauge is designed for setting and measuring lift door closing pressures. It can also be used to check belt tensions on hydraulic pumps or door operator drives.
-
Wurtec Rope Retirement Gauge
More Details Wurtec Rope Retirement GaugeThe rope retirement gauge is designed specifically to enable fast and accurate rope evaluation and analysis, determining whether the rope needs to be replaced.
-
Wurtec Sill Height Measuring Gauge
More Details Wurtec Sill Height Measuring GaugeManufactured from durable Polymer, this tool allows you to easily and accurately measure the difference in height from the landing to car sill plate. Simply place the tool on the highest sill and push the gauge down until it rests on the lower sill plate.
