Plated Versions

Plated Versions

Pressing the button brings the lights on in the normal way, then the lights will switch off automatically after a time lag has elapsed. The time lag settings can be adjusted by a spindle on the bottom edge of the product. All plated versions can switch up to 6 Amps of any type of load including fluorescent lights. Both two wire (no neutral required) and three wire versions are available.

Dimensions HxWxL (mm) = 30 x 67 x 103

(All 1x)

Dimensions HxWxL (mm) = 30 x 79 x 123

(All 2x)

Order Code Description Adjustable Time Lag
TLSW10 Time Delay Switch - 2 Wire 1 to 10 minutes
TLSW10/ILM As Above, But With Illuminated Push Button 1 to 10 minutes
TLSWA20 Time Delay Switch - 3 Wire (Needs Neutral Wire) 2 to 20 minutes
TLSWA20/ILM As Above, But With Illuminated Push Button 2 to 20 minutes
To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.

Order Code Description Qty Required FAV+
TLSW10 Time Delay Switch - 2 Wire
TLSW10/ILM As Above, But With Illuminated Push Button
TLSWA20 Time Delay Switch - 3 Wire
TLSWA20/ILM As Above, But With Illuminated Push Button