Henning Weightwatcher Light Beam

Henning Weightwatcher Light Beam


To view the data sheet for this product please click the following link: Weight Watcher Light Beam PDF

Quick and simple to install, this overload measuring system meets the requirements of EN 81 Simply mounted on the cross beam, these compact load sensors are available in three sizes, each having an integrated evaluation unit, reducing wiring time. A permanent connection to the lift control unit is achieved by means of three Change Over (C/O)programmable relays. Weightwatcher Light Beam sensors can be installed in just a few minutes. After the sensor has been calibrated, the evaluation unit displays the lift car load. As soon as the parameters for the three output relays have been entered, using the built in keypad, the unit is ready for operation.

Order Code Product Application Range Breaking Load L x W x H Supply Voltage LED Display Operation Output Relays Can Open
456250 Beam 5000 500-5000kg 12500kg 205 x 64 x 41mm 12-28 Volts DC 4 Digits 3 Push Buttons 3 C/O NO
456255 Beam 5000 Can Open 500-5000kg 12500kg 205 x 64 x 41mm 12-28 Volts DC 4 Digits 3 Push Buttons N/A YES
To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.

Order Code Description Qty Required FAV+
456250 456250 Weightwatcher Light Beam
456255 456255 Cam Open Weightwatcher Light Beam