Wiring Ancillaries
-
External Cable Connectors
These are ideal for connecting, repairing or extending external power cables, pumps, etc. The IP67 rated H65Z is ideal for joining and repairing cables, whereas the IP68 rated H85Z has a plug and socket design making it ideal for pump applications.
-
CHOC Enhanced Performance Connection Box
The CHOC connection box is manufactured to BS EN6059-1 and BS4533-1990 for cable retention and flammability. With a snap shut/quick release lid, it houses a wide range of connector blocks from 2 to 30A. The external cable clamps are reversible in order to accommodate a wider range of cable size connections.
-
Service Connector Boxes
These heavy duty service connector boxes are available in either single or double pole and are rated at 100A.
-
Heat Shrink Sleeving
Heat shrink sleeving is suitable for general insulation, cable marking and colour coding. It has a shrink ration of 2:1 and will operate between temperatures of -55 to +1350C. Each pack contains 4 colours, brown, blue, black and grey, with packs HSK3, 6 and 9 containing 3 x 250mm lengths of each colour and packs HSK19 and 25 containing 2 x 250mm lengths of each colour.
-
Grommets and Grommet Strip
Grommets & Grommet Strip
-
Draw Tapes
Draw tapes are designed for drawing electrical wiring through conduits etc. They are available in both nylon and steel. Also available is a retractable draw tape which is housed in a convenient rotating plastic storage case with handle. The draw tape is controlled by a brake trigger mechanism in the handle. The hooked end avoids snagging once the wire has been attached.
-
GET Range Safety Plug Tops
All square pin plug tops are manufactured to BS1363 and all round pin plug tops are manufactured to BS546.
-
MK Range Safety Plug Tops
All square pin plug tops are manufactured to BS1363 and all round pin plug tops are manufactured to BS546.
-
Safety Countdown Plug
The countdown plug cuts the power to an appliance after 20, 40 or 60 minutes, just in case you forget. It simply replaces the existing plug and bleeps 2.5mins before the timer runs out, enabling the user to set more time if desired. If not, when the timer runs out, the plug will cut the power to make the appliance safe. It is ideally suited to portable heaters, irons, etc.
-
GET Range Trailing Sockets and Extension Leads
All trailing sockets and extension leads are manufactured to BS1363.