Wiring Ancillaries
-
WAGO 221 Connectors
Pull the lever up, insert a conductor and push the lever back down – done.
-
GET Range Pullcord Switches, Battens and Pendants
All pullcord switches are manufactured to BS5733. Battens and pendants are manufactured to BS5042.
-
PVC Connector Strips
Manufactured from a flexible polyethylene material, PVC connector strips feature 12 terminals, housing brass inserts and screws.
-
Plug-in 'Klik' Ceiling Roses
Plug-in ceiling roses offer a modular plug and socket interface that provides electrical connection in one easy 'click' action, enabling luminaires to be plugged in without the need for circuit isolation. They are manufactured to BS 6972 and BS 5733.
-
MK Range Pullcord Switches, Battens and Pendants
All pullcord switches are manufactured to BS5733. Battens and pendants are manufactured to BS5042.
-
Flush Mounting Boxes
All flush mounting boxes are manufactured to BS4662 and feature earth terminal and adjustable lug.
-
Surface Steel Boxes For Logic Plus Accessories
All MK surface mounting boxes are manufactured to BS5733 and are designed to facilitate the surface mounting of Logic Plus accessories.
-
Junction Boxes
Our range of junction boxes are manufactured to BS6220 and feature robust, generous capacity slot terminals with large grub screws. Rear entry knockouts in the base offer ease of wiring.
-
Porcelain Connector Blocks
Porcelain connector blocks are manufactured to BS1962 and are available in single and two way. They are able to withstand much higher temperature extremes than PVC connector blocks. Temperature range -800C to +1050C.
-
PVC Electrical Insulation Tape
Supplied in 33mtr rolls and 19mm wide, PVC insulation tape is flame retardant to BS3924 IEC 454. We also supply PVC insulation tape in suites of 6 and 12 rolls as detailed below.
-
External Cable Connectors
These are ideal for connecting, repairing or extending external power cables, pumps, etc. The IP67 rated H65Z is ideal for joining and repairing cables, whereas the IP68 rated H85Z has a plug and socket design making it ideal for pump applications.
-
CHOC Enhanced Performance Connection Box
The CHOC connection box is manufactured to BS EN6059-1 and BS4533-1990 for cable retention and flammability. With a snap shut/quick release lid, it houses a wide range of connector blocks from 2 to 30A. The external cable clamps are reversible in order to accommodate a wider range of cable size connections.
-
Service Connector Boxes
These heavy duty service connector boxes are available in either single or double pole and are rated at 100A.
-
Heat Shrink Sleeving
Heat shrink sleeving is suitable for general insulation, cable marking and colour coding. It has a shrink ration of 2:1 and will operate between temperatures of -55 to +1350C. Each pack contains 4 colours, brown, blue, black and grey, with packs HSK3, 6 and 9 containing 3 x 250mm lengths of each colour and packs HSK19 and 25 containing 2 x 250mm lengths of each colour.
-
Grommets and Grommet Strip
Grommets & Grommet Strip
-
Draw Tapes
Draw tapes are designed for drawing electrical wiring through conduits etc. They are available in both nylon and steel. Also available is a retractable draw tape which is housed in a convenient rotating plastic storage case with handle. The draw tape is controlled by a brake trigger mechanism in the handle. The hooked end avoids snagging once the wire has been attached.
-
GET Range Safety Plug Tops
All square pin plug tops are manufactured to BS1363 and all round pin plug tops are manufactured to BS546.
-
MK Range Safety Plug Tops
All square pin plug tops are manufactured to BS1363 and all round pin plug tops are manufactured to BS546.
-
Safety Countdown Plug
The countdown plug cuts the power to an appliance after 20, 40 or 60 minutes, just in case you forget. It simply replaces the existing plug and bleeps 2.5mins before the timer runs out, enabling the user to set more time if desired. If not, when the timer runs out, the plug will cut the power to make the appliance safe. It is ideally suited to portable heaters, irons, etc.
-
GET Range Trailing Sockets and Extension Leads
All trailing sockets and extension leads are manufactured to BS1363.
-
MK Range Trailing Sockets and Extension Leads
All trailing sockets and extension leads are manufactured to BS1363.
-
TV and Satellite Plugs, Connectors and Splitters
TV & Satellite Plugs, Connectors & Splitters
-
RCD Adaptors and Plugs, Heavy Duty In-Line RCDs
RCD adaptors and plugs are manufactured to BS7071 and offer added protection against electrocution when used with electrical appliances and equipment. The RCD adaptor simply plugs into any standard 13A socket, offering RCD protection for any portable electrical appliance.
The RCD safety plug simply wires as a three pin plug and provides automatic switch off, on loss of supply voltage. It is ideal for wiring on the supply end of extension lead cables.
The heavy duty, IP65 rated in-line RCD provides added personal protection against electrocution when working in adverse conditions, such as building sites, plant applications, where water presents a danger and where rough handling is expected.
It is available in both 110V and 240V.
-
Pre wired in-line RCD GFCI
GFCI in-line RCD pre wired and available in 110v or 230v
-
Commercial Plug-In and Hard Wired Time Switches
Our range of timers includes domestic plug-in timers and immersion heater timers which are available in both mechanical and electronic versions. They are manufactured to BS 3456.