Cable Accessories
-
Nylon Cable Tie Fixings
Cable tie masonry mounts are screwed into a 6mm diameter hole and then the tie is fed through the aperture in the screw head.
Cable tie fixings with rawlplug and fixing pin works by inserting a two part rawlplug into a pre-drilled hole and then securing it by hammering in the fixing pin, thus leaving a wall mounted cable tie facility.
-
Self Adhesive Cable Tie Bases
Self adhesive cable ties bases are available in either 19x19mm or 27x27mm and black or white.
-
Self Adhesive Clips
Available in white only, self adhesive clips are suitable for routing cables inside cabinets or racks. The clips can be used to support cables ties or the cable itself. They are ideal for noise sensitive work areas like hospitals and libraries and can be used on both steel and plastic.
-
Cable Tie Cradles
Cable tie cradles maintain cable ties firmly in place, increasing their resistance and are supplied with holes for fixing screws. They are available in black and white.
-
Heat Shrink Sleeving
Heat shrink sleeving is suitable for general insulation, cable marking and colour coding. It has a shrink ration of 2:1 and will operate between temperatures of -55 to +135°C. Each pack contains 4 colours, brown, blue, black and grey.
-
Expandable Braided Sleeving
A lightweight flexible sleeving providing tough physical protection for bundles of cables. It has a working temperature of -20°C to +105°C.
-
Din Rail
Din Rail
-
Din Rail Terminals and Accessories
Our range of Din Rail terminals are made from unbreakable high strength Polyamide 6.6 and are flame retardant up to UL94V-2.They conform to IEC947-7-1.
-
Din Rail Terminal Markers
Din Rail terminal markers are available in strips of 10, as detailed below.
-
Din Rail Terminal Block Kit
The Din Rail terminal block kit consists of two 300mm lengths of rail, each with fifty numbered terminals, 1-49 and 50-100.The kit is designed for use in areas where space prohibits the use of a standard half way box enclosure.