Cable Accessories
-
Plastic Clips For Round Cable
Round cable plastic clips are manufactured from high density polyethylene and are resistant to both extremes of hot and cold, (-40 to +80°C).They are suitable for wood, masonry, plasterboard and concrete.
-
Plastic Clips For Flat Cable
Flat cable plastic clips are manufactured from high density polyethylene and are resistant to both extremes of hot and cold, (-40 to +80°C).They have high stiffness and excellent dimensional stability. They are suitable for wood, masonry, plasterboard and concrete.
-
Mineral Insulated PVC Coated Cable Clips
Although these clips are suitable for fixing most types of cable, their LSOH properties make them ideal for fire rated cables.
-
PVC Cable Cleats
One piece polyethylene cleats take a single bolt fixing for cables up to 50mm in diameter. They are suitable for both indoor and outdoor use and can be used in conjunction with metals and other material without electrolytic or chemical reaction. PVC cable cleats are widely used for securing Steel Wired Armoured (SWA) cables.
-
2 Part Cable Cleats
2 part cable cleats are designed to secure very large power cables between 50mm and 105mm in diameter. They can also be used to fix hydraulic hoses and pipes.
-
Spiral Binding
Spiral binding offers a simple and fast method of binding and protecting cable looms prior to installation or in situ. It enables cables to be directed from any point and will follow any route taken by the cable.
-
P Clips For Flexible Conduit And Cable
P Clips are manufactured from plated steel with a PVC insert. They Are suitable for fixing both flexible conduits and cables, with intermediate sizes being accommodated by removing the PVC insert.
-
Rubber Cable Protector
Designed to protect cables and prevent accidents when cables are laid across flooring. The base is easily split to facilitate insertion of cables. Rubber cable protector is IP40 rated.
-
Nylon Cable Ties
Nylon cable ties are inert to fungus and mould and are resistant to petrols, oils, grease and alkalis. They are self extinguishing to U.L.94V2 and can be tensioned by hand.
-
Stainless Steel Cable Ties
Stainless Steel cable ties are an ideal alternative for when nylon ties are not suitable. They have excellent resistance to abrasion, corrosion, radiation, weathering and extremes of temperature.
-
Nylon Cable Tie Fixings
Cable tie masonry mounts are screwed into a 6mm diameter hole and then the tie is fed through the aperture in the screw head.
Cable tie fixings with rawlplug and fixing pin works by inserting a two part rawlplug into a pre-drilled hole and then securing it by hammering in the fixing pin, thus leaving a wall mounted cable tie facility.
-
Self Adhesive Cable Tie Bases
Self adhesive cable ties bases are available in either 19x19mm or 27x27mm and black or white.
-
Self Adhesive Clips
Available in white only, self adhesive clips are suitable for routing cables inside cabinets or racks. The clips can be used to support cables ties or the cable itself. They are ideal for noise sensitive work areas like hospitals and libraries and can be used on both steel and plastic.
-
Cable Tie Cradles
Cable tie cradles maintain cable ties firmly in place, increasing their resistance and are supplied with holes for fixing screws. They are available in black and white.
-
Heat Shrink Sleeving
Heat shrink sleeving is suitable for general insulation, cable marking and colour coding. It has a shrink ration of 2:1 and will operate between temperatures of -55 to +135°C. Each pack contains 4 colours, brown, blue, black and grey.
-
Expandable Braided Sleeving
A lightweight flexible sleeving providing tough physical protection for bundles of cables. It has a working temperature of -20°C to +105°C.
-
Din Rail
Din Rail
-
Din Rail Terminals and Accessories
Our range of Din Rail terminals are made from unbreakable high strength Polyamide 6.6 and are flame retardant up to UL94V-2.They conform to IEC947-7-1.
-
Din Rail Terminal Markers
Din Rail terminal markers are available in strips of 10, as detailed below.
-
Din Rail Terminal Block Kit
The Din Rail terminal block kit consists of two 300mm lengths of rail, each with fifty numbered terminals, 1-49 and 50-100.The kit is designed for use in areas where space prohibits the use of a standard half way box enclosure.
-
Colour Coded Number Cable Markers
Chevroned PVC cable markers are easily applied to equipment wires, cables and pipes from 2.5mm to 5.0mm diameter (cables size 0.75- 4.0mm²). All letters (Black on white) and numbers (Colour coded) are available in handy packs of 250.
-
Black and White Letter Cable Markers
Chevroned PVC cable markers are easily applied to equipment wires, cables and pipes from 2.5mm to 5.0mm diameter (cables size 0.75- 4.0mm²). All letters (Black on white) are available in handy packs of 250.
-
Cable Marker Kit
An 18 compartment kit containing 4500 markers.
-
Cable Marker Dispensers
A cable marking system consisting of a handy dispenser with tear-off mechanism, filled with 10 rolls of self adhesive vinyl cloth tape. Rolls are 5mm wide, 2.4mts long and contain about 500 markings.
-
Armoured Cable Gland Packs
A complete armoured cable gland consists of one gland, shroud, earth tag and locknut. Gland pack sizes 20mm to 32mm contain 2 complete glands, while gland sizes 40mm to 75mm contain one complete gland. BW gland packs are suitable for indoor use, CW gland packs for outdoor use and LSF (low smoke and fume) gland packs are suitable for use when fire, smoke emission or toxic fumes would create a threat to life and equipment.
-
Brass CXT Gland Packs
CXT gland packs are IP66 rated and are suitable for use with flexible armoured cables such as SY and CY screened control flex. The IP66 watertight seal enables the glands to be used for both indoors and outdoors applications. A complete gland consists of one gland, two brass washers, one locknut and one shroud.More Details Brass CXT Gland Packs -
Flat Cable Bonding Nipples
A range of flat cable bonding nipples suitable for flexible and non-armoured cables.
-
Round Armoured Cable Glands
A range of round armoured cable glands suitable for flexible and non-armoured cables.
-
Brass TRS Cable Glands
A range of brass TRS cable glands suitable for flexible and non-armoured cables.
-
PVC Black and White Cable Glands
A range of PVC black & white cable glands suitable for flexible and non-armoured cables.
Cable Glands come complete with locknuts
-
German Standard PG Thread Accessories - Brass Plug
German Standard PG Thread Accessories - Brass Plug
-
German Standard PG Thread Accessories - Brass Lock Nut
German Standard PG Thread Accessories - Brass Lock Nut
-
German Standard PG Thread Accessories - Brass TRS Gland
PG7 Brass TRS Gland
-
German Standard PG Thread Accessories - PVC Cable Gland
PG7 PVC Cable Gland
-
German Std PG Thread Accessories - PVC Lock Nut
German Std PG Thread Accessories - PVC Lock Nut
-
Pre-Insulated Ring Crimp Terminals
Pre-Insulated Ring Crimp Terminals
-
Pre-Insulated Ring Fork Terminals
Pre-Insulated Ring Fork Terminals
-
Pre-Insulated Female Push-On Crimp Terminals
Pre-Insulated Female Push-On Crimp Terminals
-
Fully Insulated Female Push-On Terminals
Fully Insulated Female Push-On Terminals
-
Fully Insulated Female Angled Push-On Terminals
Fully Insulated Female Angled Push-On Terminals
-
Pre-Insulated Piggy Back Crimp Terminals
Piggy Back Terminals
-
Pre-Insulated Splice Crimp Terminals
Pre-Insulated Splice Crimp Terminals
-
Pre-Insulated Blade Crimp Terminals
Pre-Insulated Blade Crimp Terminals
-
Pre-Insulated Pin Crimp Terminals
Pre-Insulated Pin Crimp Terminals
-
Pre-Insulated Spade Crimp Terminals
Pre-Insulated Spade Crimp Terminals
-
Self Stripping Connectors - Scotchlok Type
Scotchloks offer excellent electrical connection without cutting tap or run wires. They are simple to use (applied with pliers) and offer three types of connection: tap, low voltage and pigtail. Pack quantity is 100.
-
Flex End Terminals
Flex-end terminals facilitate solid and reliable connection, thus preventing arcing, which can sometimes occur between conductors which have not been properly crimped. Pack quantity is 100.
-
Closed End (Insulated) Terminals Dog Cocks
These connectors are used to terminate wires and seal them from oxygen and moisture, preventing corrosion. They are particularly useful in applications where a secure connection is essential. Closed end terminals are commonly employed in electrical circuits, automotive wiring, and industrial setups. Their design ensures a tight fit, reducing the risk of wire fraying or loosening. By providing insulation and protection, they contribute to the overall reliability and safety of electrical connections
-
6mm Stud Uninsulated Copper Terminals
6mm Stud Uninsulated Copper Terminals
-
8mm Stud Uninsulated Copper Terminals
8mm Stud Uninsulated Copper Terminals
-
10mm Stud Uninsulated Copper Terminals
10mm Stud Uninsulated Copper Terminals
-
12mm Stud Uninsulated Copper Terminals
12mm Stud Uninsulated Copper Terminals
-
14mm Stud Uninsulated Copper Terminals
14mm Stud Uninsulated Copper Terminals
-
16mm Stud Uninsulated Copper Terminals
16mm Stud Uninsulated Copper Terminals
-
Through Splice
Through Splice
-
Insulated And Uninsulated Terminal Kit 1
Assortment Of 12 Popular Pre-Insulated Crimp Terminals (1.5-6.0mm). Complete With A Hand Ratchet Crimp Tool.
-
Insulated And Uninsulated Terminal Kit 2
Assortment Of 12 Popular Uninsulated Copper Tube Terminals (10-16mm). Complete With A Hand Ratchet Crimp Tool.
-
Insulated And Uninsulated Terminal Kit 3
Assortment Of 16 Popular Pre-Insulated Crimp Terminals (1.5-6mm)
-
Insulated And Uninsulated Terminal Kit 4
Assortment Of 12 Popular Uninsulated Copper Tube Terminals (10-16mm).
-
Copper Tube Non Ratchet Heavy Duty Crimping Tool
Non Ratchet Heavy Duty Crimping Tool For Copper Tube Terminals Size 25mm-150mm.
-
Copper Tube Ratchet Crimping Tool
Ratchet Crimping Tool For Copper Tube Terminals Size 10mm-16mm.
-
Pre-Insulated Terminal Ratchet Crimping Tool
Ratchet Crimping Tool For Pre-Insulated Terminals Size 0.5mm-6.0mm.
-
Insulated Crimp Terminal Ratchet Crimping Tool
Heavy Duty Ratchet Crimping Tool For Insulated Crimp Terminals Size 0.5mm-6mm. Designed For Frequent Use. Features Low Pressure Grip For Comfort.
-
Female Angled Terminal Ratchet Crimping Tool
Ratchet Crimping Tool For Fully Insulated Female Angled Push-on Terminals 6mm.
-
Cable Sheath Stripper
Cable Sheath Stripper. Designed to strip cable sheath on cables 6.0 to 29mm in diameter. It features a self locking adjustable cutting depth for sheath thickness.
-
Coaxial Cable Stripper
Coaxial Cable Stripper. Designed to strip cable sheath from coaxial TV cables 4.8 to 7.5mm in diameter, i.e. RG58 and RG59 TV cable. It can also be adjusted to strip RG62 TV cable by means of an hexagon key, which is supplied.
-
Self Adjusting Insulation Stripper
Self Adjusting Insulation Stripper. Well suited for repetitive tasks, the tool adjusts to suit the cable cross section automatically. suitable for stripping cables from 6.0 to 18mm in dia.
-
Cable Stripper, Crimper and Cutter Tool
A Versatile Low Cost Tool Which Will Strip, Crimp And Cut PVC Cables From 0.5mm- 6.0mm.
-
Professional Cable Stripper
Single Hand Action, Professional Cable Stripper, Featuring Jaws That Automatically Stay Open So That The Cable Can Be Removed Without Crushing. Suitable For Cables 0.25mm-6.0mm Offering A Maximum Strip Length Of 22mm.
-
Medium Duty Cable Cutter
Medium Duty Cable Cutter For Cables Up To 50mm² (14mm Diameter).
-
Hand Ratchet Cable Cutter
Hand Ratchet Cable Cutter For Cutting PVC Sheathed Copper And Aluminium Cables Up To 500mm² (55mm Diameter).