Contactors

Contactors

Autoline is a comprehensive range of contactors designed for the control of heating and lighting loads. They have been successfully type tested to BS EN 60947-4-1:1992.

Rectifiers for silent running are available for all 240V AC units and can be fitted to type 22 and 42 contactors in existing installations without the need to change coils.

The range consists of:

  • 25A and 40A, 4 pole.
  • 40A and 64A, 2 pole.
  • 70A and 112A single pole with fitted neutral link.

Note: Rectifiers for silent running are available for all 230-240V AC units. If required, please suffix the above codes with ‘R’.

Description Heating And General Mixed Lighting Load Order Code Dimensions Cable Capacity
Loads, Slightly Inductive Amps Per Pole Coil Voltage HxWxD (mm) (mm²)
Amps Per Pole AC1 230-240v 380-415v
4 Pole 25 12 228ALCFP 248ALCFP 160x106x114 4
2 Pole 40 25 228ALCDP - 223x141x125 16
1 Pole 70 50 228ALCSPN - 223x141x125 50
4 Pole 40 32 428ALCFP 448ALCFP 223x141x125 10
2 Pole 64 40 428ALCDP - 223x141x125 25
1 Pole 112 50 428ALCSPN - 223x141x125 50
To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.

Order Code Description Qty Required FAV+
228ALCFP 4 Pole - 230-240v - 228ALCFP
228ALCDP 2 Pole - 230-240v - 228ALCDP
228ALCSPN 1 Pole - 230-240v - 228ALCSPN
428ALCFP 4 Pole - 230-240v - 428ALCFP
428ALCDP 2 Pole - 230-240v - 428ALCDP
428ALCSPN 1 Pole - 230-240v - 428ALCSPN
248ALCFP 4 Pole - 380-415v - 248ALCFP
448ALCFP 4 Pole - 380-415v - 448ALCFP