Heating And Lighting Control

Heating And Lighting Control

Autoline is a comprehensive range of contactors designed for the control of heating and lighting loads. They have been successfully type tested to BS EN 60947-4-1:1992.

Rectifiers for silent running are available for all 240V AC units and can be fitted to type 22 and 42 contactors in existing installations without the need to change coils.

The range consists of:

  • 25A and 40A, 4 pole.
  • 40A and 64A, 2 pole.
  • 70A and 112A single pole with fitted neutral link.

Note: Rectifiers for silent running are available for all 230-240V AC units.If required, please suffix the above codes with 'R'.

Order Code Description Heating And General Mixed Loads, Slightly Inductive Amps Per Pole AC1 Lighting Load Amps Per Pole Dimensions HxWxD (mm) Cable Capacity (mm²)
Coil Voltage
230-240V 380-415V
228ALCFP 248ALCFP 4 Pole 25 12 160x106x114 4
228ALCDP - 2 Pole 40 25 223x141x125 16
228ALCSPN - 1 Pole 70 50 223x141x125 50
428ALCFP 448ALCFP 4 Pole 40 32 223x141x125 10
428ALCDP - 2 Pole 64 40 223x141x125 25
428ALCSPN - 1 Pole 112 50 223x141x125 50

Example: 228ALCFP is a 25A 4 pole enclosed contactor with 240V coil.

To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.

Order Code Description Qty Required FAV+
228ALCFP (228ALCFP) Control
248ALCFP (248ALCFP) Control
228ALCDP (228ALCDP) Control
228ALCSPN (228ALCSPN) Control
428ALCFP (428ALCFP) Control
448ALCFP (448ALCFP) Control
428ALCDP (428ALCDP) Control
428ALCSPN (428ALCSPN) Control