MEMCOM Wiring Looms
The Memcom wiring looms have been developed to allow the quick and simple integration of a Memcom unit into installed lifts. The looms, which are pre-wired into the Memcom terminal block allow for the existing pictograms and alarm push button installed in the lift to be utilised and provide labelled wires to connect into these components. The looms make installing a Memcom unit quicker and easier and reduce the amount of lift-specific knowledge needed to use the pre-installed pictograms and alarm push buttons.
Some of these looms also contain relays, removing the need to source and install relays to switch pictogrames. Simply plug the loom into the Memcom and wire in to the lift as detailed on the wire label
When this is combined with the programming interface of the Memcom system, it results in an emergency telephone offering which allows simple, logical installation with clear and quick programming.
| Order Code | Description |
|---|---|
| 450880-02 | Memcom Loom Orona |
| 450887-01 | Memcom Loom Otis Gen 2 REM |
| 450887-02 | Memcom Loom Thyssenkrupp Galaxy Isis |
| 450887-03 | Memco Loom Schindler Smart |
| 450887-07 | Memcom Loom Otis Gen 2 REM 6 |
| 450887-08 (was 450887-04) | Memco Loom Kone KRM |
PDF Data Sheets
To view the Data Sheets please click the appropriate link below:-
- 450887-01-OTIS-gen2.PDF
- 450887-02-ThyssenKrupp.PDF
- 450887-03-Schindler.PDF
- 450887-04-Kone.PDF
- 450887-07-Gen 2 REM 6.PDF
Adobe PDF Reader required
Viewing the PDF Data Sheets requires the Adobe PDF Reader which you can download for free by clicking the link below.
