Memcom DCP/GSM Terminal & Sim Cards

Memcom DCP/GSM Terminal & Sim Cards

The Digital Communication Platform (DCP) provides an information gateway between all compatible connected devices in the lift shaft and our cloud based monitoring platform; the Avire Hub. Maintenance companies working with a multi-brand and legacy lift portfolio are not typically able to offer customers a monitoring platform due to the difficulties associated with accessing information from the lift controller. In this situation, the DCP is the ideal solution as it acts as a controller independent gateway passing data in and out of the lift shaft. The DCP is installed in the Machine Room and when connected to compatible devices, the data from this system can be hugely valuable to lift maintenance companies

Available in 2g for voice only. Or 4g for voice and data.

The DCP/GSM terminal requires a SIM card, these are available in either 24 month or 36 month contracts.

The GSM terminal is ideally sited in the machine room and with sufficient mobile signal.

To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.

Order Code Description Qty Required FAV+
452000 2g Avire GSM MCM-2CM10-100-F-20-000
AC4CM10610F20 4g Avire GSM AC-4CM10-610-F-20-000
SIM24M sim card 24 month open network
SIM36M sim card 36 month open network