Industrial Maintenance Aerosols
-
Fast Drying Industrial Cleaner
More Details Fast Drying Industrial CleanerA general purpose solvent specifically designed for the removal of all types of workshop contamination such as grease, dirt and oil from components and metal parts without the need for subsequent rinsing. Can size is 400ml.
-
Circuit Board Cleaner
More Details Circuit Board CleanerAn alcohol based cleaning solvent specifically designed for use in the general electronics industry for cleaning and degreasing printed circuit boards, electrical contacts, read/write heads, type paths and guide posts. It is compatible with most plastics, leaving no residue and has a controlled drying time. Can size is 400ml.
-
Pressurised Air Duster
More Details Pressurised Air DusterA special formulation of non-flammable gas which is designed to give a high pressure discharge to remove dust from inaccessible areas. It is ideal for use on delicate areas of computer hardware, disc cartridges, live electrics and hot componentry. Can size is 400ml.
-
Clear Penetrating Oil
More Details Clear Penetrating OilA high performance, completely clear penetrating oil which permeates deeply to release seized and rusted components such as fasteners, hinges, locks, linkages and tools. It removes light surface rust and leaves a film of lubricant protecting from further corrosion, facilitating re-assembly. Can size is 400ml.
-
Brake And Clutch Cleaner
More Details Brake And Clutch CleanerA high performance, powerful cleaning fluid for use on parts of brake and clutch systems, eliminating brake squeal and clutch slip commonly caused by contamination and glazing. Can size is 400ml.
-
Silicone Spray
More Details Silicone SpraySilicon lubricant is excellent for use on metal, plastic, vinyl, rubber and wood. It is widely used as a release agent for moulds and can be used in food areas where 'incidental' food contact is possible. It is approved to BS6920 by The Water Research Council for use in contact with portable water. Can size is 400ml.
-
Chain And Wire Rope Lubricant
More Details Chain And Wire Rope LubricantA heavy duty chain lube that contains Molybdenum Disulphide to give outstanding performance under extreme conditions of load and environment without flinging off. Due to its ability to penetrate, only a thin film is left on the surface, which is enough to prevent corrosion and make the product economical to use. It is used on fork lift trucks and similar equipment to prevent wear and chain elongation. Can size is 400ml.
-
PTFE Dry Film Lubricant
More Details PTFE Dry Film LubricantA dry film lubricant specially formulated for use where conventional oils and greases are not suitable, due to there dirt attracting nature. It is suitable for use on machine slides, moulds, cams and shears in engineering and automotive applications, speeding up the dismantling and assembly of components and preventing damage by freeing up seized parts. It is suitable for low temperatures, but also works up to 3500C. Can size is 400ml.
-
White Grease With Teflon
More Details White Grease With TeflonA premium quality anhydrous grease for use in applications requiring good aqueous resistance. It issuitable for use in anti-friction and plain bearing pumping equipment. It is also suitable for the lubrication oflinkages, door latches, hinges, gears, springs, bearings, rubber components, 'O' rings, striker plates and sliding shackles. Can size is 400ml.
-
Cutting, Taping And Drilling Spray
More Details Cutting, Taping And Drilling SprayA 'ready to use' cutting and tapping fluid which contains extreme pressure additives to reduce cutting tool wear, dissipating heat and improving machined finish. It can be used on 'hard to work' metals including tool steel, stainless steel, aluminium and titanium. It is also suitable for drilling, thread cutting, reaming and turning. Can size is 400ml.
-
Galvanised Spray
More Details Galvanised SprayA specially formulated galvanised spray with micro particles of aluminium flake which firmly bond to iron or steel to prevent corrosion taking place. It is recommended for cosmetic finishing and protection of galvanised welding repairs. Can size is 400ml.
-
Green Moisture Guard
More Details Green Moisture GuardA moisture repellent, formulated to provide an ultra thin film, which remains soft while giving protection from corrosion in high humidity conditions. The film does not affect the assembly of precision-fit parts or with gauging and measuring during inspection. It can be used for protecting all metal surfaces from rusting, corrosion and oxidation and is commonly used in the plastic moulding industry to protect mould tools during storage. Can size is 400ml.
-
Chewing Gum Remover / Freeze Spray
More Details Chewing Gum Remover / Freeze SprayThis rapid cooling agent can be used for a number of different applications.
-
Heavy Duty Adhesive
More Details Heavy Duty AdhesiveIdeal for bonding textiles, felt, foam, synthetic leather, plastic foil, cardboard and paper. It can also be used for adhering carpets, underfelt and spot fixing of carpet tiles. Can size is 400ml.
-
Rocol Chain Spray
More Details Rocol Chain SprayIdeal for lubricating chain and drive systems that are not fitted with automatic lubrication systems. It works best at temperatures between -30°2;2;C to +150°2;2;C. Can size is 300ml.
-
3-In-One Oil Spray
More Details 3-In-One Oil SprayA state of the art, fast-acting formulation with superior penetration. It has hundreds of uses around the home, garage or workshop, preventing rust from forming, whilst lubricating and protecting at the same time. It is ideal for sharpening chisels or planes, frees rusted nuts and bolts and helps to loosens seized parts and components. Can size is 250ml.
-
WD40 Lubricant Spray
More Details WD40 Lubricant SprayThe world’s number one multi-purpose lubricant. It stops squeaks, drives out moisture, cleans and protects, loosens rusted parts and frees sticky mechanisms and components. Can size is 400ml.
