Termination Glands For Flat Travelling Cable

Termination Glands For Flat Travelling Cable

Flat cable Entries offer a simple and neat solution for terminating flat travelling cable into a terminal box or control panel. They consist of two parts, which are separated. Use the outer frame as a template to cut a hole for your Flat Flex. Once the hole is cut, attach the captive seal to the frame and fix in place. There is no need to strip the flat flex, yet. Pass the flat flex through the seal and strip as desired. The Cable Entries are IP65 and are suitable for both 0.75mm and 1.0mm cable. PVC and LSZH

Order Code Description
FCE6 Flat Cable Entry For 6 way cable
FCE12 Flat Cable Entry For 12 Way Cable
FCE18 Flat Cable Entry For 18 Way Cable
FCE24 Flat Cable Entry For 24 Way Cable
To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.

Order Code Description Qty Required FAV+
FCE6 Flat Cable Entry for 6 way Cables
FCE12 Flat Cable Entry for 12 way Cables
FCE18 Flat Cable Entry for 18 way Cables
FCE24 Flat Cable Entry for 24 way Cables